Home / Products / Nickel Alloys / Inconel 601 / ASTM B166 Inconel 601 Rods
Inconel 601 (UNS: N06601, Werkstoff Nr.: 2.4851)
Inconel 601 Rods is considered as one of the best products that we are engaged in supplying, exporting and trading in bulk as per the demands of our customers. These rods are extremely rigid in state and offer high level of performance without any hindrance. All these products are well equipped and ensure long lasting service life. These sections are corrosion resistant and needs low maintenance.
ASTM B166 Inconel 601 Rods
Specifications
| Standards |
Designation |
| ASTM |
B 166 |
| ASME |
SB 166 |
| UNS |
N06601 |
| Werkstoff Nr. |
2.4851 |
| Sizes |
Availability |
| 6mm |
|
| 8mm |
|
| 10mm |
|
| 12mm |
|
| 13mm |
|
| 16mm |
|
| 19mm |
|
| 22mm |
|
| 28mm |
|
| 40mm |
|
| 60mm |
|
| 75mm |
|
| 90mm |
|
| 120mm |
|
Dimensions
Inconel 601 is a nickel-chromium-iron alloy. Inconel 601 is a general purpose engineering material that require resistance to heat & corrosion. Inconel 601 has outstanding resistance to high temperature oxidation.
Chemical Composition
|
Inconel 601 |
| Ni |
58.0 – 63.0 |
| Cr |
21.0 – 25.0 |
| Fe |
Balance |
| Al |
1.0 – 1.7 |
| C |
0.10 max |
| Mn |
1.0 max |
| S |
0.015 max |
| Si |
0.5 max |
| Cu |
1.0 max |
Mechanical & Physical Properties – Inconel 601
| Density |
8.1 g/cm3 |
| Melting Point |
1411 °C (2571 °F) |
| Tensile Strength |
Psi – 80,000 , MPa – 550 |
| Yield Strength (0.2%Offset) |
Psi – 30,000 , MPa – 205 |
| Elongation |
30 % |
Subcategory: Metal; Nickel Base; Superalloy
Key Words: Inconel 601, Nickel-Chromium Alloy; Werkstoff Nr. 2.4851, UNS N06601; ASME Boiler Code Section VIII; AMS 5715, AMS 5870; ASTM B166, ASTM B167, ASTM B168; DIN 17742, 17750 - 17752
Component Wt. %
Al 1 - 1.7
C Max 0.1
Cr 21 - 25 |
Component Wt. %
Cu Max 1
Fe 13
Mn Max 1
58 - 63 |
Component Wt. %
Ni
S Max 0.015
Si Max 0.5 |
| Standard product forms are round, flats, forging stock, pipe, tube, plate, sheet, strip, and wire. |
| Electrical Properties |
| Electrical Resistivity |
0.000119 ohm-cm |
0.000119 ohm-cm |
|
| Magnetic Permeability |
1.003 |
1.003 |
at 200 oersted (15.9 kA/m) |
| Curie Temperature |
Max -196 °C |
Max -321 °F |
|
| Thermal Properties |
| CTE, linear 20°C |
13.75 µm/m-°C |
7.64 µin/in-°F |
20-100°C |
| Heat Capacity |
0.448 J/g-°C |
0.107 BTU/lb-°F |
|
| Thermal Conductivity |
11.2 W/m-K |
77.7 BTU-in/hr-ft²-°F |
|
| Melting Point |
1360 - 1411 °C |
2480 - 2570 °F |
|
| Solidus |
1360 °C |
2480 °F |
|
| Liquidus |
1411 °C |
2570 °F |
|
Main Export Market
- Eastern Europe
- North America
- Mid East/Africa
- Central/South America
- Asia
- Western Europe
- Australasia
- UAE
Sales Locations
U.A.E,
Oman,
Saudi Arabia,
Qatar,
Bahrain,
Egypt,
Turkey
Singapore,
Thailand,
Malaysia
Indonesia
Poland
Italy
Portugal
Spain
Brazil
Chile
Venezuela
Costa Rica
USA
Canada
Angola
Sri Lanka
Russia
